All FlexQube carts being used by Siemens!

This 146 x 63-inch cart is specially designed for transporting fully loaded containers. The large industrial tugger cart is equipped with an ergonomic handle bar and a drop pin hitch tow bar for easy transportation in a tugger train set-up.

This is a large, robust shelf cart, which has been designed for transporting very large and heavy materials. This cart has had wire mesh attached to ensure the materials are held securely in place. The cart can be modified with added tow bar or handle bars if needed.

This stage cart is a perfect example of how flexible the FlexQube system is. The cart was designed for staging materials easily so the operators/assemblers can access materials efficiently and boost productivity. The materials can be placed in between the upright tubes to keep them securely in place.

This assembly cart has been designed for assemblers to keep materials and tools in one place easily. The assembly cart can be also be used as a work table, as the four attached swivel casters all come with brakes to keep the cart locked firmly in place.

This small cart is specifically designed for efficient hanging of hoses, tubes and wires. The cart can also be used to hang circular materials of different types. It has been found to significantly boost assembly times, because of the easy access it allows to assemblers.

This 50 x 50 inch tugger cart with attached flat steel deck is perfectly designed for transporting fully loaded pallets and containers. This is one of FlexQube’s most popular solutions due to its robustness and simple design. This cart is equipped with an ergonomic handle bar and a drop pin hitch tow bar for use in a tugger train set-up. It also comes with a floor lock brake to secure the cart in place when not being transported.

This small mother solution has been created to hold four daughter carts within its frame. The four daughter carts can be unlocked from this mother frame and left at different work and assembly stations (learn more about mother-daughter solutions). This mother frame is equipped with a drop pin hitch tow bar to be transported using a tugger train set-up.

This kit cart is actually designed to be used as a daughter cart within a mother frame. It comes equipped with small flat shelves as well as hanging bins across the top to hold small materials and tools. The mother frame these carts fit into is described below.

This 2-in-1 mother frame is the mother cart for the kit carts described above. It can house two daughter carts at a time and is equipped with a drop pin hitch tow bar to be used in a tugger train set-up.

This 4-in-1 mother frame is designed to house up to four tall daughter carts inside of it. Each of the shelf carts can be unlocked from the frame and left at different work stations. This mother frame is equipped with a drop pin hitch tow bar and is designed to be towed within a tugger train system. The daughter carts for this mother frame are described below.

This 25 x 17-Inch daughter cart is designed to fit the 4-in-1 mother frame described above. These daughter carts come equipped with one flat shelf along the bottom of the cart and small bins hung from the back side of the daughter cart to house different tools and materials.

This kit cart is another great example of how flexible the FlexQube concept can be. The kit cart is designed to be left at different work and assembly stations and is equipped with shelves to place bins, totes and boxes as well as little bins hung above the top shelf for housing smaller materials

This bin cart is a great little design to house bins for different materials and tools. It has two handles attached on each side and four swivel casters, two of which have brakes. This makes this cart very easy to move around the facility to leave at work and assembly stations.

This custom-designed kit cart was designed to improve the presentation of materials to the assembly line. The angled design of the hanging cart makes it easier for the operators to access the materials.

This kit cart was designed to improve the presentation of materials to the operators at the assembly line. It also comes with a tow bar so it can be transported within a tugger train system.

This stage cart is custom designed for components and products that need to be transported standing up. By equipping the cart with an ergonomic handlebar it is easily maneuvered manually within the facility. The attached tongue and hitch tow bar make it possible to transport the cart with a tugger.

Tugger kit cart equipped with shelves and inclined tubes mounted to a pegboard to hold components. The tubes have a protective cover to prevent scratching.

Tuggable two-level flat shelf cart, most commonly used for transportation of totes/bins/boxes or loose components. The cart is equipped with six polyurethane casters, two fixed and four swivels giving it excellent tracking properties and silent movement when connected in a train. Forklift pockets ease transportation with a forklift.

This shelf cart is used to transport bins, totes, and boxes. However, the shelves are very robust and can manage larger containers and other materials. This cart also comes equipped with wire mesh around the outside to keep the materials secure.

Tuggable kit cart used for transportation of plates/panels as well as totes and boxes. The plates and panels can be placed on the left side between tubes that have been covered in plastic to prevent the parts from being damaged and the totes can be placed on the shelves on the right side. The cart is also equipped with four high-quality polyurethane casters, two fixed and two swivel which gives the cart excellent tracking properties and silent movement when connected in a train.

Shelf kit cart designed to be used in combination with Q-100-1043 in a mother-daughter system. The mother-daughter concept is most commonly used in a “milk run system” meaning you use the mother cart to transport daughter carts filled with material from warehouse to assembly line and picking up empty daughter carts on the way back.